Installing the Touch Screen

Written By: Joseph Podgorski
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. The Display will be mounted to the front Right Corner of your Talos. T-Nuts should already be installed in the frame but there will be extras available if they need to be replaced. Using a 3mm Hex Wrench or T-Handle mount the display with 4xM5x12mm bolts.

    • The Display will be mounted to the front Right Corner of your Talos.

    • T-Nuts should already be installed in the frame but there will be extras available if they need to be replaced.

    • Using a 3mm Hex Wrench or T-Handle mount the display with 4xM5x12mm bolts.

    Edit

  2. Plug the display cable into the display port noted in the first picture. Plug the second end of the display cable into the Electronics Box noted in the second picture

    • Plug the display cable into the display port noted in the first picture.

    • Plug the second end of the display cable into the Electronics Box noted in the second picture

    • Secure the cable to the bottom of the center X Frame extrusion with the included cable tie mounts and zip ties provided. The blue line in the second picture is where it should be mounted.

    Edit
Finish Line

Author

Joseph Podgorski

Member since: 03/05/2020

4,312 Reputation

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 24