Installing the Spool Holders

Written By: Joseph Podgorski
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

1

Time Required

Suggest a time??

Sections

1

Flags

0

  1. On the left side of the printer, you will mount both spool holders. There are 8 T-Nuts installed in the middle X Frame, there are addition nuts if they need to be replaced. Using a 3mm Hex or T-Handle mount the spool holders with 4 m5x12mm bolts.

    • On the left side of the printer, you will mount both spool holders.

    • There are 8 T-Nuts installed in the middle X Frame, there are addition nuts if they need to be replaced.

    • Using a 3mm Hex or T-Handle mount the spool holders with 4 m5x12mm bolts.

    Edit
Finish Line

Author

Joseph Podgorski

Member since: 03/05/2020

4,312 Reputation

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 26