-
-
You have two options when it comes to connecting to the internet.
-
The first option is via the Ethernet port on the right side of the unit, this is recommend for production environments.
-
The next option is via WiFi if Ethernet is not accessible.
-
-
-
What you will need to connect via Ethernet.
-
Daedalus 3D Printer
-
Ethernet Cable (Included)
-
Power Cord (Included)
-
-
-
Plugin the power cable to the right side of the unit
-
Ensure the printer is off
-
Plugin the Ethernet to the right side of the printer
-
"How to access the IP address"
-
-
-
What you will need to connect via WiFi.
-
Daedalus 3D Printer
-
Computer
-
Power Cord (Included)
-
USB Drive (Included)
-
-
-
Plugin the included USB Drive into your computer.
-
On the USB Drive there is a file called (Name Here). Open the file and fill in the following information :
-
SSID: (the name of the network you are attempting to connect to)
-
Password: (this is your WiFi password)
-
Save the file and eject your USB Drive.
-
-
-
Plug the Power Cord into the right side of the Daedalus Unit.
-
Ensure the unit is off.
-
Plug the USB Drive into any of the four open USB ports on the right side of the unit.
-
Power on the unit and weight 3 minutes while the unit powers on. This wait time is only needed when uploading your WiFi information.
-
During this time it will rewrite the onboard WiFi information. Once it's rewritten it will create a file on the USB Drive named (Name) where it will give you the IP address that allows you to access your printer via the web interface.
-
-
-
Now you can remove your USB Drive from the unit.
-
Insert the USB Drive back into your computer and open the file named (FIle Name)
-
You IP Address will look like this:
-